Sticky Tape Replacement Guide

Buy our prepackaged “Sticky Tape Replacements” sized for your Mainejane’s Tacklers™ or you can make your own.

Here is our suggested replacement method and preferred product we use:

  1. Scrape old “Sticky Tape” off your two VELCRO® Brand straps.

  2. Cut two pieces of your sticky tape approximately 2 inches shorter than your VELCRO® Brand straps. For Kids sizing, cut one piece of your sticky tape approximately 8 inches in length. Cut this piece in half lengthwise, keeping the protective layer on both sides of the tape.

  3. Lay one piece of your cut tape on a flat surface.

  4. Remove the top paper from the new tape.

  5. Center your VELCRO® Brand strap rough side down, then press firmly back and forth sideways. The warmth of your hands will ensure a good stick!

  6. Cover with your clear layer marked “Keep This Side on Top.”*

  7. Repeat 3 - 6 with your second VELCRO® Brand strap.

  • Store in your original bag, ready for your next outdoor adventure.

*You must identify the “topside” of the tape and keep that side on top or your layers will not be able to be separated! Use a sticker or mark with an “x” to keep sticky side up!

Look for Roberts Double-Sided Carpet Tape at Lowe’s, Home Depot or your local hardware store. Take care when working with this tape, it’s extremely sticky!

Don’t want to make your own? Shop our replacements that are pre-cut and ready for your Tackler!

Replacement Tape
from $10.00